Marble UV coat hot stamping foil embossing stamping
PVC ABS Hot stamping foil main material is PET.
Rich and colorful designs and patterns, and the superposition, interleaving, and compounding of different patterns shows fancy and tridimensional effect for sighting; suitable for whole transfer, part transfer and special hot stamping
Product Specification:
- It is moisture resistant, corrosion resistant, wear well, water proof and without bubble.
- It is easy to operate with high efficiency.
- High glossy UV coat
- Matt UV coat
- Thickness: 23microns;
- Tube diameter: 75mm
- Regular width: 1280mm,640mm
- Length: 500m
- Color: marble design wood design wall paper design
- Customised width and length: depend on customers requirement
Application Area:
-PVC board
-PVC wall skirting
-PVC sheet
-Any PVC products
| How To Test Hot Stamping Foil: |
| 1. Put the hot stamping foil on hot stamping machine. |
| 2. Up the temperature to 150-180 degree. |
| 3. Thress by the machine and stamping on the materials. |
| 4. See the stamping process and test the surface color are well. |
| 5 Tear off the PET film left the color on the surface. |
| 6. Take the products and put on some sheet. |
| Samples & Catalogue For Hot Stamping Foil: |
| 1. We will send you the samples together with the catalogue as your requirement ASAP; |
| 2. Suggest the samples as one 50meter roll so as to put them in the express parcel; |
| 3. Normally the samples are free, but would you please pay the freight postage. |
中文简体
English
русский
Español
عربى
Türk
